|
In telecommunication, frame synchronization or framing is the process by which, while receiving a stream of framed data, incoming frame alignment signals (i.e., a distinctive bit sequences or syncwords) are identified (that is, distinguished from data bits), permitting the data bits within the frame to be extracted for decoding or retransmission. == Framing == If the transmission is temporarily interrupted, or a bit slip event occurs, the receiver must re-synchronize. The transmitter and the receiver must agree ahead of time on which frame synchronization scheme they will use. Common frame synchronization schemes are: ;Framing bit: A common practice in telecommunications, for example in T-carrier, is to insert, in a dedicated time slot within the frame, a noninformation bit or framing bit that is used for synchronization of the incoming data with the receiver. In a bit stream, framing bits indicate the beginning or end of a frame. They occur at specified positions in the frame, do not carry information, and are usually repetitive. ;Syncword framing: Some systems use a special syncword at the beginning of every frame. ;CRC-based framing: Some telecommunications hardware uses CRC-based framing. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「frame synchronization」の詳細全文を読む スポンサード リンク
|